In the meantime, a workaround would be to copy the count_modes.png file from the repository to the [GALAXY_HOME]/static/images directory.
Lance
Joachim Jacob | VIB | wrote:
*sorry for my late reply - we have experienced some email issues lately *
Thanks, a clean install from the new versions works!
Unfortunately, the 'get updates' from the admin interface of Galaxy does not find any updates with the old version.
So, I searched the main toolshed, and I was able to install the new version next to the old (instead of updating). The install succeeded, but I always have to restart Galaxy to get the tool available in the toolbox.
One small remark: the screenshot in the tool's interface below the parameters is not shown.
Cheers
Joachim
Joachim Jacob
Rijvisschestraat 120, 9052 Zwijnaarde
Tel: +32 9 244.66.34
Bioinformatics Training and Services (BITS)
http://www.bits.vib.be
@bitsatvib
On 03/11/2013 06:34 PM, Lance Parsons wrote:
I have posted an updated version of the htseq-count tool in the toolshed that uses and updated version of the HTSEQ count package (0.5.4p1) and hopefully addresses the installation issue you have experienced. Please try it out and let me know if you still have problems.
Lance
Joachim Jacob | VIB | wrote:
Hi Lance,
[apologies for directly emailing to you and not through the galaxy-dev list. I will post it on the dev list later on]
I am trying to install htseq-count, but it fails during the dependency installation of htseq.
The error I get is:
error: can't create or remove files in install directory
The following error occurred while trying to add or remove files in the
installation directory:
[Errno 2] No such file or directory: '/apps/htseq/0.5.3p9/lparsons/htseq_count/f320093f1e8e/lib64/python/test-easy-install-30482.pth'
The installation directory you specified (via --install-dir, --prefix, or
the distutils default setting) was:
/apps/htseq/0.5.3p9/lparsons/htseq_count/f320093f1e8e/lib64/python/
This directory does not currently exist. Please create it and try again, or
choose a different installation directory (using the -d or --install-dir
option).
Any idea whether it is related to my setup (and what I can do about it)? Note: only the htseq_count dependency is not being installed.
Thanks for providing the htseq_count wrapper! Now getting it through the toolshed will make it again a little closer to a perfect world :-)
Cheers,
Joachim
Joachim Jacob
Rijvisschestraat 120, 9052 Zwijnaarde
Tel: +32 9 244.66.34
Bioinformatics Training and Services (BITS)
http://www.bits.vib.be
@bitsatvib
On 12/17/2012 05:28 PM, Lance Parsons wrote:
Thanks for looking into this Greg. The environment where I'm having this problem is our testing and production systems.
Both environments are CentOS release 5.8 (Final) with Mercurial version 2.4.1.
Interestingly, when I tried the same thing with a development setup on my OSX box (10.6.8) with Mercurial 2.4 I did not have the same issue. One difference is that on my testing/production boxes I do have an older version of the tool installed, so perhaps that is the issue.
I also tried uninstalling, but that led to the (expected) error that that a previous changeset is installed:
The tool shed repository htseq_count with owner lparsons and changeset revision f320093f1e8e was previously installed using changeset revision 5d969cb56112. The repository has been uninstalled, however, so reinstall the original repository instead of installing it again. You can get the latest updates for the repository using the Get updates option from the repository's Repository Actions pop-up menu. Click here to manage the repository.
I then attempted to reinstall and I got a javascript message the cloning failed, and the repo is now "stuck" in the cloning state. I did not see anything in the paster logs regarding this at all.
Here are the steps I took on my local system:
1. Upload htseq-count v0.3 to local toolshed
2. Install on local galaxy
3. Upload htseq-count v0.3-release2 to toolshed
[Errno 2] No such file or directory: '/Users/lparsons/Documents/projects/sequencing/galaxy/galaxy-test1/database/community_files/000/repo_3/./tool_data_table_conf.xml.sample'
STDOUT from paster
htseq-count.xml does not exist!
sam_fa_indices.loc.sample does not exist!
static/images/count_modes.png does not exist!
test-data/htseq-test-paired.bam does not exist!
test-data/htseq-test-paired_counts.tsv does not exist!
test-data/htseq-test-paired_othercounts.tsv does not exist!
test-data/htseq-test.bam does not exist!
test-data/htseq-test.gff does not exist!
test-data/htseq-test.sam does not exist!
test-data/htseq-test_counts.tsv does not exist!
test-data/htseq-test_othercounts.tsv does not exist!
tool_data_table_conf.xml.sample does not exist!
4. Second attempt to upload
The file 'htseq-count_0.3.release2.tar.gz' has been successfully uncompressed and uploaded to the repository. 1 undesirable items (.hg .svn .git directories, .DS_Store, hgrc files, etc) were removed from the archive. 13 files were removed from the repository root.
5. Get repository updates
The installed repository named 'htseq_count' has been updated to change set revision '74a6a8221337'.
Greg Von Kuster wrote:
Hi Lance,
I tried several scenarios today in an attempt to reproduce this but I was not able to. Have you tried uninstalling the repository (check the checkbox to completely uninstall it) and then reinstall it? I'm trying to reproduce this on a mac running mercurial version 2.2.3 and Python 2.5. What's your environment?
Greg Von Kuster
On Dec 13, 2012, at 2:30 PM, Lance Parsons wrote:
Since I've had issues with workflow and the toolshed in the past, I have changed my workflow so that my only interaction with the toolshed is either via uploading a tarball via the web interface or installing a tool into my local Galaxy via the web interface (or occasionally just downloading tarballs).
In this specific case, I uploaded a tar.gz file of the entire tool wrapper directory. I did NOT increment the tool version. In the past, incrementing the tool version has generally worked fine. However, when I leave the tool version the same, but change something (such as the help text for the tool), and then upload a tarball to the toolshed, I am unable to pull updates into my local galaxy instance. I get an error similar to what I have described.
I hope this is enough information, but let me know if I can provide more detail, etc. I would very much like to get to the root of this issue, since it has plagued my attempts to use the toolshed smoothly when (seemingly inevitable) minor changes need to be made. In the past I have just had to wait until I update the tool version, as no changes can be made to the installed revision in my production Galaxy instance.
Greg Von Kuster wrote:
Hi Lance,
What process did you use for updating the tool shed repository and how many separate repositories did you use? You should not be updating a local repository, pushing the changes to the tool shed repository, and then attempting to pull the changes back to the same repository. Your repository environment should be something like this:
DEV REPO ( all development updates are performed here, so this is where the tool version is incremented )
|
V
<pushed changeset>
|
V
EXISTING TOOL SHED REPO
|
V
<pulled changeset to some previously cloned repo>
|
V
PREVIOUSLY CLONED (possibly production) REPO
In other words, nothing should ever get pushed and pulled from the tool shed repo into the same repo. If this is the process you used, it would undoubtedly result in the behavior you saw. If you used separate repos as I describe above, we'll need more details as to the process you used in order to determine the cause of the problem.
Greg Von Kuster
On Dec 10, 2012, at 1:45 PM, Lance Parsons wrote:
I recently updated the htseq-count tool in the Galaxy toolshed to version 0.3. This version has some functional changes and thus the tool version was incremented. I installed this new version of the tool in my local Galaxy instance.
However, I realized later that I missed updating one part of the help text. Today I fixed that text (but left the tool version the same), tarred up the file, and uploaded it to the toolshed. I then attempted to "Get Updates" from my local Galaxy instances for that tool got the following error:
URL:http://galaxy-dev.princeton.edu/admin_toolshed/update_to_changeset_revision?tool_shed_url=http://toolshed.g2.bx.psu.edu/&name=htseq_count&owner=lparsons&changeset_revision=5d969cb56112&latest_changeset_revision=f320093f1e8e&latest_ctx_rev=11
File '/data/galaxy-dev/galaxy-dev/eggs/WebError-0.8a-py2.6.egg/weberror/evalexception/middleware.py', line 364 in respond
app_iter = self.application(environ, detect_start_response)
File '/data/galaxy-dev/galaxy-dev/eggs/Paste-1.6-py2.6.egg/paste/debug/prints.py', line 98 in __call__
environ, self.app)
File '/data/galaxy-dev/galaxy-dev/eggs/Paste-1.6-py2.6.egg/paste/wsgilib.py', line 539 in intercept_output
app_iter = application(environ, replacement_start_response)
File '/data/galaxy-dev/galaxy-dev/eggs/Paste-1.6-py2.6.egg/paste/recursive.py', line 80 in __call__
return self.application(environ, start_response)
File '/data/galaxy-dev/galaxy-dev/lib/galaxy/web/framework/middleware/remoteuser.py', line 91 in __call__
return self.app( environ, start_response )
File '/data/galaxy-dev/galaxy-dev/eggs/Paste-1.6-py2.6.egg/paste/httpexceptions.py', line 632 in __call__
return self.application(environ, start_response)
File '/data/galaxy-dev/galaxy-dev/lib/galaxy/web/framework/base.py', line 160 in __call__
body = method( trans, **kwargs )
File '/data/galaxy-dev/galaxy-dev/lib/galaxy/web/framework/__init__.py', line 206 in decorator
return func( self, trans, *args, **kwargs )
File '/data/galaxy-dev/galaxy-dev/lib/galaxy/webapps/galaxy/controllers/admin_toolshed.py', line 1677 in update_to_changeset_revision
update_repository( repo, latest_ctx_rev )
File '/data/galaxy-dev/galaxy-dev/lib/galaxy/util/shed_util_common.py', line 1428 in update_repository
rev=ctx_rev )
File '/data/galaxy-dev/galaxy-dev/eggs/mercurial-2.2.3-py2.6-linux-x86_64-ucs2.egg/mercurial/commands.py', line 5661 in update
rev = scmutil.revsingle(repo, rev, rev).rev()
File '/data/galaxy-dev/galaxy-dev/eggs/mercurial-2.2.3-py2.6-linux-x86_64-ucs2.egg/mercurial/scmutil.py', line 515 in revsingle
l = revrange(repo, [revspec])
File '/data/galaxy-dev/galaxy-dev/eggs/mercurial-2.2.3-py2.6-linux-x86_64-ucs2.egg/mercurial/scmutil.py', line 588 in revrange
for r in m(repo, range(len(repo))):
File '/data/galaxy-dev/galaxy-dev/eggs/mercurial-2.2.3-py2.6-linux-x86_64-ucs2.egg/mercurial/revset.py', line 1414 in mfunc
return getset(repo, subset, tree)
File '/data/galaxy-dev/galaxy-dev/eggs/mercurial-2.2.3-py2.6-linux-x86_64-ucs2.egg/mercurial/revset.py', line 156 in getset
return methods[x[0]](repo, subset, *x[1:])
File '/data/galaxy-dev/galaxy-dev/eggs/mercurial-2.2.3-py2.6-linux-x86_64-ucs2.egg/mercurial/revset.py', line 171 in symbolset
return stringset(repo, subset, x)
File '/data/galaxy-dev/galaxy-dev/eggs/mercurial-2.2.3-py2.6-linux-x86_64-ucs2.egg/mercurial/revset.py', line 161 in stringset
x = repo[x].rev()
File '/data/galaxy-dev/galaxy-dev/eggs/mercurial-2.2.3-py2.6-linux-x86_64-ucs2.egg/mercurial/localrepo.py', line 235 in __getitem__
return context.changectx(self, changeid)
File '/data/galaxy-dev/galaxy-dev/eggs/mercurial-2.2.3-py2.6-linux-x86_64-ucs2.egg/mercurial/context.py', line 103 in __init__
_("unknown revision '%s'") % changeid)
RepoLookupError: unknown revision '11'
I believe this is because the revision I have installed (10) is not longer considered a valid revision by the toolshed (I presume since it is an older revision of with the same tool version).
Any help would be appreciated. Thanks.
--
Lance Parsons - Scientific Programmer
134 Carl C. Icahn Laboratory
Lewis-Sigler Institute for Integrative Genomics
Princeton University
___________________________________________________________
Please keep all replies on the list by using "reply all"
in your mail client. To manage your subscriptions to this
and other Galaxy lists, please use the interface at:
http://lists.bx.psu.edu/
--
Lance Parsons - Scientific Programmer
134 Carl C. Icahn Laboratory
Lewis-Sigler Institute for Integrative Genomics
Princeton University
--
Lance Parsons - Scientific Programmer
134 Carl C. Icahn Laboratory
Lewis-Sigler Institute for Integrative Genomics
Princeton University
___________________________________________________________
Please keep all replies on the list by using "reply all"
in your mail client. To manage your subscriptions to this
and other Galaxy lists, please use the interface at:
http://lists.bx.psu.edu/
___________________________________________________________
Please keep all replies on the list by using "reply all"
in your mail client. To manage your subscriptions to this
and other Galaxy lists, please use the interface at:
http://lists.bx.psu.edu/
--
Lance Parsons - Scientific Programmer
134 Carl C. Icahn Laboratory
Lewis-Sigler Institute for Integrative Genomics
Princeton University
___________________________________________________________
Please keep all replies on the list by using "reply all"
in your mail client. To manage your subscriptions to this
and other Galaxy lists, please use the interface at:
http://lists.bx.psu.edu/To search Galaxy mailing lists use the unified search at:
http://galaxyproject.org/search/mailinglists/