Modi, Amit wrote:
> Hi ,
>
> Thanks a lot for the prompt reply.
>
> Our tool in the normal course of execution produce messages on both
> stdout and stderr.But  exits with a success status when successfully
> executed
>
> So, does that means galaxy will always interpret this as job failure .

In this case, yes.

>
> Is there any work around for this ?

The simplest solution is a small wrapper that will suppress the messages
from stderr.  We've found that applications may not set a non-zero exit
code upon failure, so looking for things written to stderr is the most
reliable method for detecting failure.

Since this is your own app and you know it sets proper return codes, the
best thing to do would be to suppress stderr if the program returns 0,
otherwise, print them as usual.

--nate

>
> Regards,
> Amit Modi
>
>
>
>
> On 4/21/10 1:13 PM, "Nate Coraor" <nate@bx.psu.edu> wrote:
>
>     Modi, Amit wrote:
>     >  Hi,
>     >
>     >  I am almost done with integrating our tool with galaxy.
>     >
>     >  It would be really great if you can help solve this issue as I was
>     >  unable find anything related to this on the wiki.
>     >
>     >  Our tool produces some output messages during its execution due to
>     some
>     >  reason galaxy splits them into 2 categories and displays as additional
>     >  output and error messages though both of them are standard output
>     >  messages ad should be displayed as additional output .
>     >
>     >
>     >  Here is the snapshot of the message that  is displayed.
>     >
>     >  *Dataset 52: PPL File
>     >  *
>     >  Tool execution generated the following error message:
>     >  10/04/21 12:14:26 @0s, Initializing
>     >  10/04/21 12:14:26 @0s, Performing analysis
>     >  10/04/21 12:14:30 @4s, Analysis complete
>     >  10/04/21 12:14:30 @4s, Finished run
>
>     Hi Amit,
>
>     Are you sure that these messages are being printed to stdout?  Galaxy
>     seems to be reading them from stderr.
>
>     --nate
>
>     >
>     >  The tool produced the following additional output:
>     >  10/04/21 12:14:26 Use segment ID 4620291 for diagnostic purposes
>     >  10/04/21 12:14:26 kelvin V0.38.0 edit 2805 built Mar 25 2010 12:13:28
>     >  10/04/21 12:14:26 Compiler 4.1.1 20070105 (Red Hat 4.1.1-52)
>     >  10/04/21 12:14:26 Using GNU Scientific Library (GSL) statistical
>     >  functions instead of internal ones
>     >  10/04/21 12:14:26 OpenMP-enabled w/maximum of 4 thread(s).
>     >  10/04/21 12:14:26 GCC optimization level 2 enabled
>     >  10/04/21 12:14:26 To check status (at some risk), type CTRL-\ or type
>     >  "kill -3 28022"
>     >  10/04/21 12:14:26 Using configuration file
>     >  /export/home/galaxy/galaxy-dist/database/files/000/dataset_151.dat
>     >  10/04/21 12:14:26 Computation is done in polynomial mode
>     >  10/04/21 12:14:26 polynomialScale is 1 (1-10, 1 is default)
>     >  10/04/21 12:14:26 Integration is done numerically (dkelvin)
>     >  10/04/21 12:14:26 Further progress will be displayed at 120 second
>     intervals
>     >  10/04/21 12:14:26 9 pair(s) over a dynamic space (1LC) for 11
>     pedigree(s)
>     >  10/04/21 12:14:26 Trait-to-marker Two-Point, Dichotomous Trait,
>     Equilibrium.
>     >  10/04/21 12:14:30 stopwatch overall(1) e:4s u:8s s:1s, vx:205780,
>     >  ivx:15961, sf:14225, hf:0
>     >
>     >
>     >  Also, the tool executes just fine and also produces the correct output
>     >  files.
>     >
>     >  I can verify these files by looking into the
>     >  galaxy/galaxy-dist/database/files/000/ directory.
>     >
>     >
>     >   But for some reason these files are not displayed on the web
>     interface
>     >  of galaxy and this error message is displayed along with failed
>     status.
>     >
>     >  Thanks a lot.
>     >
>     >  Regards,
>     >  Amit Modi
>     >
>     >
>     >  On 4/19/10 11:34 AM, "Nate Coraor" <nate@bx.psu.edu> wrote:
>     >
>     >      Modi, Amit wrote:
>     >      >  Hi,
>     >      >
>     >      >
>     >      >  We are trying to configure Galaxy to work with our tool.
>     >      >
>     >      >  So far I have been able to configure it well and link it
>     with the
>     >      >  cluster to do process all the jobs as per the documentation .
>     >      >
>     >      >  Now what we want is the before the actual processing starts the
>     >      >  validations for the input files are done on the
>     >      >  Local. And the job processing is done on the cluster.
>     >      >
>     >      >  Is there anyway we can configure this.
>     >      >
>     >      >  We are using sge on the cluster.
>     >
>     >      Hi Amit,
>     >
>     >      I'm not sure what you mean by input file validation?  You can have
>     >      metadata set on the cluster by setting
>     'set_metadata_externally = True'
>     >      in the config file.  Additionally, the data source tools like
>     Upload and
>     >      UCSC can run on the cluster, providing the following are true:
>     >
>     >      1. The default directory used by Python's tempfile module is
>     >      cluster-accessible (usually /tmp, so you can change it by
>     setting $TEMP
>     >      in the environment).
>     >
>     >      2. The cluster nodes have access to the Internet (NAT is fine).
>     >
>     >      If this is not what you're looking for, please let us know.
>     >
>     >      --nate
>     >
>     >      >
>     >      >  Thanks a lot.
>     >      >
>     >      >
>     >      >
>     >      >  Regards,
>     >      >  Amit Modi
>     >      >
>     >      >
>     >
>         ------------------------------------------------------------------------
>     >      >
>     >      >  * ----------------------------------------- Confidentiality
>     >      Notice: The
>     >      >  following mail message, including any attachments, is for
>     the sole use
>     >      >  of the intended recipient(s) and may contain confidential and
>     >      privileged
>     >      >  information. The recipient is responsible to maintain the
>     >      >  confidentiality of this information and to use the information
>     >      only for
>     >      >  authorized purposes. If you are not the intended recipient (or
>     >      >  authorized to receive information for the intended
>     recipient), you are
>     >      >  hereby notified that any review, use, disclosure, distribution,
>     >      copying,
>     >      >  printing, or action taken in reliance on the contents of this
>     >      e-mail is
>     >      >  strictly prohibited. If you have received this
>     communication in error,
>     >      >  please notify us immediately by reply e-mail and destroy
>     all copies of
>     >      >  the original message. Thank you. *
>     >      >
>     >      >
>     >      >
>     >
>         ------------------------------------------------------------------------
>     >      >
>     >      >  _______________________________________________
>     >      >  galaxy-dev mailing list
>     >      >  galaxy-dev@lists.bx.psu.edu
>     >      >  http://lists.bx.psu.edu/listinfo/galaxy-dev
>     >
>     >
>
>