Thanks, Jim!
I'll see if my limited Galaxy/bioinformatics skills can rise to the challenge of using your wrapper (I've never visited the "tool shed" before).
Out of curiosity, how did people use the files generated by the barcode splitter without this? I'm assuming there was/is a way, but I'm not figuring it out.
Jeremy
On Tue, Jul 19, 2011 at 11:26 AM, Jim Johnson <johns198@umn.edu> wrote:
I've had users make a similar request for the split files to appear in their history. I made my own wrapper to enable this behavior. It presents a list of barcodes from the barcode file input. Any barcodes the user selects will have the resulting files copied to the users history as new datasets. I uploaded my barcode splitter tool configs to the toolshed: http://toolshed.g2.bx.psu.edu/ as repository: barcode_splitter JJ Date: Mon, 18 Jul 2011 13:33:58 -0700 From: Jeremy Coate <jec73@cornell.edu> To: David K Crossman <dkcrossm@uab.edu> Cc: "galaxy-user@lists.bx.psu.edu" <galaxy-user@lists.bx.psu.edu> Subject: Re: [galaxy-user] using files produced by "Barcode Splitter" Message-ID: <CAA2BWd5uERaqEoUeQ97TfNhkwvHziq89wHVR-Oy04ov-K4ju6Q@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" Thanks David, I had considered this possibility but, curiously, the files don't show up in the FastQ Groomer pull-down menu either. The original (multiplexed) data file that I split using the Barcode Splitter is there (and, incidentally, I ran FastQ Groomer on that before doing the barcode split), but none of the 3 files resulting from the splitter show up. Any other thoughts? It seems like the new files just aren't landing in my history, though I can look at them by clicking their links from the Barcode Splitter output. Jeremy On Mon, Jul 18, 2011 at 12:01 PM, David K Crossman <dkcrossm@uab.edu> wrote:*Subject:* [galaxy-user] using files produced by "Barcode Splitter"**** ** ** I used the "Barcode Splitter" tool to split multiplexed RNA-Seq libraries into separate files. I would now like to map the reads from each of these fastq files to a reference genome. However, the fastq files generated by Barcode Splitter don't appear in the "Fastq File" pull-down menus within the the BWA or Bowtie launch pages. I'm probably missing something obvious, but what is the trick for making these files available for the mapping tools? Do I need to import them into my history somehow?**** ** ** Thanks! Jeremy****Jeremy,**** ** ** The files need to be groomed using the FastQ Groomer so that they will end up in the fastqsanger state. Then your files will show up in the pull-down menus.**** ** ** David**** ** ** ** ** *From:* galaxy-user-bounces@lists.bx.psu.edu [mailto: galaxy-user-bounces@lists.bx.psu.edu] *On Behalf Of *Jeremy Coate *Sent:* Monday, July 18, 2011 1:44 PM *To:* galaxy-user@lists.bx.psu.edu
___________________________________________________________
The Galaxy User list should be used for the discussion of
Galaxy analysis and other features on the public server
at usegalaxy.org. Please keep all replies on the list by
using "reply all" in your mail client. For discussion of
local Galaxy instances and the Galaxy source code, please
use the Galaxy Development list:
http://lists.bx.psu.edu/listinfo/galaxy-dev
To manage your subscriptions to this and other Galaxy lists,
please use the interface at:
http://lists.bx.psu.edu/