Hello Galaxy users, Just to follow-up on my user group question described in the list-serv e-mail just sent out. I put forth the question about FASTQ collapse, as the FASTX-toolkit by Assaf Gordon describes the supported collapse tool as follows: "FASTQ/A Collapser, Collapsing identical sequences in a FASTQ/A file into a single sequence (while maintaining reads counts)" Yet, the collapse tool in Galaxy appears to be FASTA supported only? Why am I asking? Would like to remove duplicate reads in a FASTQ file by sequence, leaving one representative unique read having the best quality line among the duplicates it was identified from. Can certainly convert FASTQ to FASTA, then collapse, but if you do not have the qual file, you cannot reconstitute a FASTQ file with actual qual scores. Any argument for or against? Or can Galaxy already do and I am missing the tool to actually use? Thanks ... best, Kory -------------------------------------------- Kory R. Johnson, MS, PhD Sr. Bioinformatics Scientist www.kellygovernmentsolutions.com Providing Contract Services For: Bioinformatics Section, Information Technology & Bioinformatics Program, Division of Intramural Research (DIR), National Institute of Neurological Disorders & Stroke (NINDS), National Institutes of Health (NIH), Bethesda, Maryland Mailing Address: NINDS/NIH Clinical Center (Building 10) Office 5S223 9000 Rockville Pike Bethesda, MD 20892 Contact Information: Phone: 301-402-1956 Fax: 301-480-3563 email: johnsonko@ninds.nih.gov Green Message: Please consider the environment before printing this e-mail. Thank you. Important Message: This electronic message transmission contains information intended for the recipient only. Such that, the information contained herein may be confidential, privaledged, or proprietary. If you are not the intended recipient, be aware that any disclosure, copying, distribution, or use of this information is strictly prohibited. If you have received this electronic information in error, please notify the sender immediately by telephone. Thank you. -------------------------------------------- -----Original Message----- From: galaxy-user-request@lists.bx.psu.edu [mailto:galaxy-user-request@lists.bx.psu.edu] Sent: Thursday, February 03, 2011 12:52 PM To: galaxy-user@lists.bx.psu.edu Subject: galaxy-user Digest, Vol 56, Issue 4 Send galaxy-user mailing list submissions to galaxy-user@lists.bx.psu.edu To subscribe or unsubscribe via the World Wide Web, visit http://lists.bx.psu.edu/listinfo/galaxy-user or, via email, send a message with subject or body 'help' to galaxy-user-request@lists.bx.psu.edu You can reach the person managing the list at galaxy-user-owner@lists.bx.psu.edu When replying, please edit your Subject line so it is more specific than "Re: Contents of galaxy-user digest..." HEY! This is important! If you reply to a thread in a digest, please 1. Change the subject of your response from "Galaxy-user Digest Vol ..." to the original subject for the thread. 2. Strip out everything else in the digest that is not part of the thread you are responding to. Why? 1. This will keep the subject meaningful. People will have some idea from the subject line if they should read it or not. 2. Not doing this greatly increases the number of emails that match search queries, but that aren't actually informative. Today's Topics: 1. CuffDiff gene fpkm tracking file. (Samuele Gherardi) 2. CuffDiff gene fpkm tracking file- Sorry! I sent only a part of my email (Samuele Gherardi) 3. Re: listing attributes of data input (Peter) 4. Re: CuffDiff gene fpkm tracking file. (Jeremy Goecks) 5. Re: Downloadable Galaxy Virtual Machine in VMware (Haarst, Jan van) 6. Re: Downloadable Galaxy Virtual Machine in VMware (Nate Coraor) 7. FASTQ collapse? (Johnson, Kory (NIH/NINDS) [C]) ---------------------------------------------------------------------- Message: 1 Date: Thu, 3 Feb 2011 09:53:44 +0000 From: Samuele Gherardi <samuele.gherardi@unibo.it> To: "galaxy-user@lists.bx.psu.edu" <galaxy-user@lists.bx.psu.edu> Subject: [galaxy-user] CuffDiff gene fpkm tracking file. Message-ID: <025DB19130DE0B43BBD868BDB9244A82C134@E10-MBX3-DR.personale.dir.unibo.it> Content-Type: text/plain; charset="iso-8859-1" this is an example of my CuffDiff gene fpkm tracking file. tracking_id class_code nearest_ref_id gene_short_name tss_id locus q1_FPKM q1_conf_lo q1_conf_hi q2_FPKM q2_conf_lo q2_conf_hi XLOC_000001 - - MT-ND5 - chrM:0-16571 12484.2 12260.8 12707.7 11447 11233.1 11661 XLOC_000002 - - USP14 TSS1,TSS2,TSS3 chr18:148586-236453 16.7235 9.41244 24.0346 19.437 11.7368 27.1371 XLOC_000003 - - SMCHD1 TSS10,TSS11,TSS12,TSS4,TSS5,TSS6,TSS7,TSS8,TSS9 chr18:2719322-2728540 28.2493 17.5093 38.9892 27.2263 16.6263 37.8262 XLOC_000004 - - EMILIN2 TSS13,TSS14 chr18:2880607-2882469 3.98118 0 7.99721 4.62875 0.278519 8.97899 I this is normal, how can I find the class code of transcript listed in the CuffDiff gene expression file? thank you in advance Samuele. ------------------------------ Message: 2 Date: Thu, 3 Feb 2011 10:58:47 +0000 From: Samuele Gherardi <samuele.gherardi@unibo.it> To: "galaxy-user@lists.bx.psu.edu" <galaxy-user@lists.bx.psu.edu> Subject: [galaxy-user] CuffDiff gene fpkm tracking file- Sorry! I sent only a part of my email Message-ID: <025DB19130DE0B43BBD868BDB9244A82CB4C@E10-MBX3-DR.personale.dir.unibo.it> Content-Type: text/plain; charset="iso-8859-1" Hello everybody, I'm quite new in NGS world, I'm trying to analize dome RNA-seq data. I followed the workflow through tophat,cufflink,cuffcompare and cuffdiff I suppose everything work fine but in the Cuffdiff gene fpkm file the column Class_Code is empty and i don't know why? this is an example of my CuffDiff gene fpkm tracking file. tracking_id class_code nearest_ref_id gene_short_name tss_id locus q1_FPKM q1_conf_lo q1_conf_hi q2_FPKM q2_conf_lo q2_conf_hi XLOC_000001 - - MT-ND5 - chrM:0-16571 12484.2 12260.8 12707.7 11447 11233.1 11661 XLOC_000002 - - USP14 TSS1,TSS2,TSS3 chr18:148586-236453 16.7235 9.41244 24.0346 19.437 11.7368 27.1371 XLOC_000003 - - SMCHD1 TSS10,TSS11,TSS12,TSS4,TSS5,TSS6,TSS7,TSS8,TSS9 chr18:2719322-2728540 28.2493 17.5093 38.9892 27.2263 16.6263 37.8262 XLOC_000004 - - EMILIN2 TSS13,TSS14 chr18:2880607-2882469 3.98118 0 7.99721 4.62875 0.278519 8.97899 I this is normal, how can I find the class code of transcript listed in the CuffDiff gene expression file? thank you in advance Samuele. ------------------------------ Message: 3 Date: Thu, 3 Feb 2011 11:05:07 +0000 From: Peter <peter@maubp.freeserve.co.uk> To: Freddy de Bree <freddy.debree@wur.nl> Cc: galaxy-user@lists.bx.psu.edu Subject: Re: [galaxy-user] listing attributes of data input Message-ID: <AANLkTimKXwr_9MFUdU7WS+qAPHTfRqdj+RRUKRLtstFX@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 On Thu, Feb 3, 2011 at 8:40 AM, Freddy de Bree <freddy.debree@wur.nl> wrote:
Dear all,
I was wondering if there is a place within the Galaxy content (a config, an xml file) that gives me some handles on how to address attributes of data input.
For example, I can get the 'file_name' of data input, by addressing this attr as 'input.file_name', and for example, the original name of the data file can be addressed with 'input.name'.
Anyone any clues where I can find this info?
Freddy de Bree
Some are given in examples on the main tool XML doc page, https://bitbucket.org/galaxy/galaxy-central/wiki/ToolConfigSyntax Others I've noticed by looking at the provided XML wrappers, and/or email list questions. For example, .ext or .extension gives the Galaxy file type (e.g. fasta). Other than that, I guess you can always read the code - but I agree that a document describing this would be nice to have. Peter ------------------------------ Message: 4 Date: Thu, 3 Feb 2011 09:14:19 -0500 From: Jeremy Goecks <jeremy.goecks@emory.edu> To: Samuele Gherardi <samuele.gherardi@unibo.it> Cc: "galaxy-user@lists.bx.psu.edu" <galaxy-user@lists.bx.psu.edu> Subject: Re: [galaxy-user] CuffDiff gene fpkm tracking file. Message-ID: <B60DBE14-31BD-432D-92BB-FB7C8363A86F@emory.edu> Content-Type: text/plain; charset=us-ascii
this is an example of my CuffDiff gene fpkm tracking file.
tracking_id class_code nearest_ref_id gene_short_name tss_id locus q1_FPKM q1_conf_lo q1_conf_hi q2_FPKM q2_conf_lo q2_conf_hi XLOC_000001 - - MT-ND5 - chrM:0-16571 12484.2 12260.8 12707.7 11447 11233.1 11661 XLOC_000002 - - USP14 TSS1,TSS2,TSS3 chr18:148586-236453 16.7235 9.41244 24.0346 19.437 11.7368 27.1371 XLOC_000003 - - SMCHD1 TSS10,TSS11,TSS12,TSS4,TSS5,TSS6,TSS7,TSS8,TSS9 chr18:2719322-2728540 28.2493 17.5093 38.9892 27.2263 16.6263 37.8262 XLOC_000004 - - EMILIN2 TSS13,TSS14 chr18:2880607-2882469 3.98118 0 7.99721 4.62875 0.278519 8.97899
I this is normal, how can I find the class code of transcript listed in the CuffDiff gene expression file?
Hi Samuele, Without seeing your history, it's difficult to say for certain what your problem is. However, I'd guess that the GTF file that you're providing to Cuffdiff does not have the p_id attribute. You can produce a GTF file with both tss_id and p_id attributes by running Cuffcompare and using sequence data. Thanks, J. ------------------------------ Message: 5 Date: Thu, 3 Feb 2011 16:54:14 +0100 From: "Haarst, Jan van" <jan.vanhaarst@wur.nl> To: "'Leon Mei'" <hailiang.mei@nbic.nl>, "'galaxy-user@lists.bx.psu.edu'" <galaxy-user@lists.bx.psu.edu> Cc: 'David van Enckevort' <david.van.enckevort@nbic.nl>, 'Rob Hooft' <rob.hooft@nbic.nl> Subject: Re: [galaxy-user] Downloadable Galaxy Virtual Machine in VMware Message-ID: <48B2C6E110F6CC4387AFCD2EBCCA0B3B25D12D432F@scomp0536.wurnet.nl> Content-Type: text/plain; charset="iso-8859-1" The download can also be done using bittorrent, torrent is available at http://www.biotorrents.net/details.php?id=136 . This might be faster, as one of the peers is in Canada. With kind regards, Jan
-----Original Message----- From: galaxy-user-bounces@lists.bx.psu.edu [mailto:galaxy-user- bounces@lists.bx.psu.edu] On Behalf Of Leon Mei Sent: Tuesday, February 01, 2011 1:08 PM To: galaxy-user@lists.bx.psu.edu Cc: David van Enckevort; Rob Hooft Subject: [galaxy-user] Downloadable Galaxy Virtual Machine in VMware
Dear list,
Within the Netherlands Bioinformatics Centre, we have implemented a Galaxy VM by wrapping up the distributed version from PennState. We are also adding more easy-to- use pipelines for Genomics and Proteomics data analysis into this server at the moment.
You can download the current version at: http://bet1.nbiceng.net/galaxy/
More documents can be found at: https://wiki.nbic.nl/index.php/Galaxy_VM
By sharing this VM, we hope to relieve you from the normal installation and configuration steps (sometimes can be difficult) if you want to run a local Galaxy instance.
If you are interested in this procedure or have questions on that, we are happy to share our experience and scripts.
Best regards, Leon
-- Hailiang (Leon) Mei Netherlands Bioinformatics Center (http://www.nbic.nl/) Skype: leon_mei? ? Mobile: +31 6 41709231
_______________________________________________ galaxy-user mailing list galaxy-user@lists.bx.psu.edu http://lists.bx.psu.edu/listinfo/galaxy-user
------------------------------ Message: 6 Date: Thu, 3 Feb 2011 11:37:01 -0500 From: Nate Coraor <nate@bx.psu.edu> To: "Haarst, Jan van" <jan.vanhaarst@wur.nl> Cc: "'galaxy-user@lists.bx.psu.edu'" <galaxy-user@lists.bx.psu.edu>, 'Leon Mei' <hailiang.mei@nbic.nl>, 'David van Enckevort' <david.van.enckevort@nbic.nl>, 'Rob Hooft' <rob.hooft@nbic.nl> Subject: Re: [galaxy-user] Downloadable Galaxy Virtual Machine in VMware Message-ID: <20110203163701.GE15147@bx.psu.edu> Content-Type: text/plain; charset=iso-8859-1 Haarst, Jan van wrote:
The download can also be done using bittorrent, torrent is available at http://www.biotorrents.net/details.php?id=136 . This might be faster, as one of the peers is in Canada.
This is great! I haven't checked the image out, but I'm fetching the torrent now and will leave it seeding here from PSU to help out. Thanks, --nate
With kind regards, Jan
-----Original Message----- From: galaxy-user-bounces@lists.bx.psu.edu [mailto:galaxy-user- bounces@lists.bx.psu.edu] On Behalf Of Leon Mei Sent: Tuesday, February 01, 2011 1:08 PM To: galaxy-user@lists.bx.psu.edu Cc: David van Enckevort; Rob Hooft Subject: [galaxy-user] Downloadable Galaxy Virtual Machine in VMware
Dear list,
Within the Netherlands Bioinformatics Centre, we have implemented a Galaxy VM by wrapping up the distributed version from PennState. We are also adding more easy-to- use pipelines for Genomics and Proteomics data analysis into this server at the moment.
You can download the current version at: http://bet1.nbiceng.net/galaxy/
More documents can be found at: https://wiki.nbic.nl/index.php/Galaxy_VM
By sharing this VM, we hope to relieve you from the normal installation and configuration steps (sometimes can be difficult) if you want to run a local Galaxy instance.
If you are interested in this procedure or have questions on that, we are happy to share our experience and scripts.
Best regards, Leon
-- Hailiang (Leon) Mei Netherlands Bioinformatics Center (http://www.nbic.nl/) Skype: leon_mei? ? Mobile: +31 6 41709231
_______________________________________________ galaxy-user mailing list galaxy-user@lists.bx.psu.edu http://lists.bx.psu.edu/listinfo/galaxy-user
_______________________________________________ galaxy-user mailing list galaxy-user@lists.bx.psu.edu http://lists.bx.psu.edu/listinfo/galaxy-user
------------------------------ Message: 7 Date: Thu, 3 Feb 2011 12:51:34 -0500 From: "Johnson, Kory (NIH/NINDS) [C]" <johnsonko@ninds.nih.gov> To: "'galaxy-user@bx.psu.edu'" <galaxy-user@bx.psu.edu> Subject: [galaxy-user] FASTQ collapse? Message-ID: <F142C51C02C33C418E931103600D1E670648E93762@NIHMLBXBB03.nih.gov> Content-Type: text/plain; charset="us-ascii" Hello, Is there an option to collapse duplicate sequences in FASTQ format. I see collapse for FASTA, but where is it for FASTQ? Thank you, Kory -------------------------------------------- Kory R. Johnson, MS, PhD Sr. Bioinformatics Scientist [cid:image001.jpg@01CBC39E.D7F751F0] www.kellygovernmentsolutions.com Providing Contract Services For: Bioinformatics Section, Information Technology & Bioinformatics Program, Division of Intramural Research (DIR), National Institute of Neurological Disorders & Stroke (NINDS), National Institutes of Health (NIH), Bethesda, Maryland Mailing Address: NINDS/NIH Clinical Center (Building 10) Office 5S223 9000 Rockville Pike Bethesda, MD 20892 Contact Information: Phone: 301-402-1956 Fax: 301-480-3563 email: johnsonko@ninds.nih.gov P Green Message: Please consider the environment before printing this e-mail. Thank you. Important Message: This electronic message transmission contains information intended for the recipient only. Such that, the information contained herein may be confidential, privaledged, or proprietary. If you are not the intended recipient, be aware that any disclosure, copying, distribution, or use of this information is strictly prohibited. If you have received this electronic information in error, please notify the sender immediately by telephone. Thank you. --------------------------------------------