- galaxy-dev - lists.galaxyproject.org

_remove_dead_weakref error even after deleting .venv (Galaxy 18.09)
by Peter van Heusden 12 Dec '18

12 Dec '18

Hi there I'm trying to run Windowmasker in Galaxy and receiving the following error: "computing the genome length pass 1 pass 2 optimizing the data structure Traceback (most recent call last): File "/tools/software/galaxy/galaxy1/database/jobs/006/6476/set_metadata_bUlLkt.py", line 1, in <module> from galaxy_ext.metadata.set_metadata import set_metadata; set_metadata() File "/tools/software/galaxy/galaxy1/lib/galaxy_ext/metadata/set_metadata.py", line 14, in <module> import logging File "/usr/lib/python2.7/logging/__init__.py", line 26, in <module> import sys, os, time, cStringIO, traceback, warnings, weakref, collections File "/usr/lib/python2.7/weakref.py", line 14, in <module> from _weakref import ( ImportError: cannot import name _remove_dead_weakref" The usual suggested fix for this is to remove the Galaxy virtual environment (.venv) and recreated it. I have done that but the error persists. Galaxy is running here on Ubuntu 16.04 with Python 2.7.12. Any advice? Thanks! Peter

1 1

Please nominate training topics for GCC2019 by Dec 31
by Dave Clements 05 Dec '18

05 Dec '18

Hi All, The *2019 Galaxy Community Conference (GCC2019)* <https://galaxyproject.org/events/gcc2019/> will be held in be held in *Freiburg, Germany, 1-6 July*. Like previous Galaxy Community Conferences <https://galaxyproject.org/gcc/>, GCC2019 will feature invited keynotes, accepted talks, posters, demos, birds-of-a-feather gatherings and *training*. The format of GCC2019 will be a bit different than the previous years: it starts with 1 day of training and then 3 days with more specialized training sessions aligned with talks. *You can read more about the new format on the conference FAQ <https://galaxyproject.org/events/gcc2019/faq/#what-will-be-the-format-for-g…>.* *The training topics that are offered are determined by the community so BY YOU! <https://docs.google.com/forms/d/1fBPjEmw7Td52rhBnC0SvflnQCD7Ue5IMJ9RkM0SjnY…>* Please give some thought to what topics you would like to see offered, or that you would like to offer, and then submit them as topic nominations <https://docs.google.com/forms/d/1fBPjEmw7Td52rhBnC0SvflnQCD7Ue5IMJ9RkM0SjnY…> . Nominated topics can cover a wide range. For example: - Introduction to Using Galaxy - Scientific topic oriented trainings - Community specific trainings - Development and administration around Galaxy - Train the trainers This list only shows some examples. *Any topic of interest to the Galaxy Community can be nominated and you are encouraged to nominate more than one topic.* If you are looking for ideas, see the topic nominated in: 2016 <https://galaxyproject.org/news/2018-12-galaxy-update/bit.ly/gcc2016noms>, 2015 <https://galaxyproject.org/news/2018-12-galaxy-update/bit.ly/gcc2015vote>, 2014 <https://galaxyproject.org/news/2018-12-galaxy-update/bit.ly/1s6NtMN>, 2013 <https://galaxyproject.org/news/2018-12-galaxy-update/bit.ly/1i2j1gN> and the Galaxy Events page <https://galaxyproject.org/news/2018-12-galaxy-update/galaxyproject.org/even…> . Training nomination is open from *December, 1st* to *December, 31*. Topics will be compiled into a uniform list by the GCC2019 Organizing Committee, and topics will be voted on by the Galaxy Community from *January, 15th* to *January, 31st*. -- https://galaxyproject.org/ https://usegalaxy.org/

1 0

December Galactic News
by Dave Clements 03 Dec '18

03 Dec '18

1 0

XMLs not reloading in all processes (UWSGI)?
by D K 03 Dec '18

03 Dec '18

I'm running version 18.05 and have noticed that when updating the tool_conf.xml that changes don't always get loaded in all processes (e.g. if I hit reload sometimes my changes show up and sometimes they do not). Also, if I try to run a new tool I've added sometimes this will fail presumably because that process doesn't have the update. The only fix for this seems to be a galaxy restart. I've turned watchdog on and am using the UWSGI + mules strategy. Any suggestions?

2 2

Fastq.gz datatype not recognized on import to data library
by Previti 03 Dec '18

03 Dec '18

Dear all, In my ongoing saga concerning our data libraries, I came across another issue after our update from 17.09 to 18.05. When trying to import fastq.gz files into a data library (linking the files from a user directory), the format is not recognized automatically. I specifically have to set the data type to fastq.gz in order for it to work at all and even then it sometimes ends up throwing an error (state = error). Is there anything in particular I need to change to make this work reliably? Cheers, Christopher -- *Dr. Christopher Previti* Genomics and Proteomics Core Facility High Throughput Sequencing (W190) Bioinformatician German Cancer Research Center (DKFZ) Foundation under Public Law Im Neuenheimer Feld 580 69120 Heidelberg Germany Room: B2.102 (INF580/TP3) Phone: +49 6221 42-4661 christopher.previti(a)dkfz.de <http://www.dkfz.de/> www.dkfz.de <http://www.dkfz.de/> Management Board: Prof. Dr. Michael Baumann, Prof. Dr. Josef Puchta VAT-ID No.: DE143293537 Vertraulichkeitshinweis: Diese Nachricht ist ausschließlich für die Personen bestimmt, an die sie adressiert ist. Sie kann vertrauliche und/oder nur für den/die Empfänger bestimmte Informationen enthalten. Sollten Sie nicht der bestimmungsgemäße Empfänger sein, kontaktieren Sie bitte den Absender und löschen Sie die Mitteilung. Jegliche unbefugte Verwendung der Informationen in dieser Nachricht ist untersagt.

3 3

installation is not finishing
by Jochen Bick 30 Nov '18

30 Nov '18

Hi, I wanted to install two tools but my installation is stuck in Installing tool dependencies. So I found out that the xmls are cloned but the dependencies are not getting installed. It looks like anything related to python is not getting installed? anyone needs some log file, please tell me. Cheers Jochen -- ETH Zurich *Jochen Bick* Animal Physiology Institute of Agricultural Sciences Postal address: Universitätstrasse 2 / LFW B 58.1 8092 Zurich, Switzerland Office: Eschikon 27 8315 Lindau, Switzerland Phone +41 52 354 92 06 jochen.bick(a)usys.ethz.ch <mailto:jochen.bick@usys.ethz.ch> www.ap.ethz.ch

3 7

number of elements in collections and multiple-true-params
by Matthias Bernt 30 Nov '18

30 Nov '18

Dear list, in a tool I want to process a set of (bam) files. For the convenience of the user I thought that it would be nice to allow collections as well as manually selected files (in a param with multiple=true). Like so: ``` <conditional name="input_type"> <param name="input_type_selector" type="select" label="BAM files"> <option value="list">data set list</option> <option value="manual">data sets</option> </param> <when value="manual"> <param name="input_bam" format="bam" type="data" multiple="true" optional="false" label="BAM files" /> </when> <when value="list"> <param name="input_bam" format="bam" type="data_collection" collection_type="list" label="BAM files" /> </when> </conditional> ``` Is there a way to get the number of data sets in both cases (in the collection or selection) in a consistent way? Currently the only way I found is: ``` #if $input_type.input_type_selector == 'manual': #set count = len($input_type.input_bam) #else #set count = len($input_type.input_bam.keys()) #end if ``` Appart from this looping works like a charm: ``` #for $bam in $input_type.input_bam: OPERATIONS... #end for ``` Cheers, Matthias -- ------------------------------------------- Matthias Bernt Bioinformatics Service Molekulare Systembiologie (MOLSYB) Helmholtz-Zentrum für Umweltforschung GmbH - UFZ/ Helmholtz Centre for Environmental Research GmbH - UFZ Permoserstraße 15, 04318 Leipzig, Germany Phone +49 341 235 482296, m.bernt(a)ufz.de, www.ufz.de Sitz der Gesellschaft/Registered Office: Leipzig Registergericht/Registration Office: Amtsgericht Leipzig Handelsregister Nr./Trade Register Nr.: B 4703 Vorsitzender des Aufsichtsrats/Chairman of the Supervisory Board: MinDirig Wilfried Kraus Wissenschaftlicher Geschäftsführer/Scientific Managing Director: Prof. Dr. Dr. h.c. Georg Teutsch -------------------------------------------

2 2

Multifactor RNA-Seq Analysis and interaction terms
by Lance Parsons 13 Nov '18

13 Nov '18

One of the labs I work with regularly uses Galaxy for their RNA-Seq analysis. They have been doing very simple analyses up to this point, using DESeq2. However, they are moving toward more complicated experimental designs that will include additional factors, some of which (genotype for example) will be interaction terms <http://bioconductor.org/packages/release/bioc/vignettes/DESeq2/inst/doc/DES…>. I have a few questions: 1. I know Marius van den Beek <https://github.com/mvdbeek> added group tags <https://github.com/galaxyproject/galaxy/pull/5457> in 18.09, which seem like they are at least one way to use multiple factors along with collections. Is there any primer/tutorial on using these? It’s not quite clear to me just yet. 2. Does anyone have any thoughts or suggestions as to how one could add interaction terms (/e.g./ |condition:genotype|) to the DESeq2 wrapper? Does this functionality exist in a different Galaxy tool? Thanks in advance. -- Lance Parsons - Scientific Programmer Carl C. Icahn Laboratory - Room 136 Lewis-Sigler Institute for Integrative Genomics Princeton University

1 0

Adding the Ilifu cloud to launch.usegalaxy.org
by Peter van Heusden 13 Nov '18

13 Nov '18

Hi there While I will continue to work on getting a Cloudlaunch server running locally, could the Ilifu cloud (http://www.ilifu.ac.za/) be added as an option on https://launch.usegalaxy.org/catalog ? What details would be required? And then - what are the requirements for adding appliances to the appliance catalogue? Thanks, Peter

1 0

Re: [galaxy-dev] Running Cloudlaunch against a new OpenStack cloud
by Peter van Heusden 13 Nov '18

13 Nov '18

Hi there I've got a bit further, but now I've got a problem - how do you access the admin panel when you have the complete site set up? 1) If Debug = False (as it is for a production setup), Django doesn't load static files (e.g. CSS). 2) When going via the nginx proxy, I can't figure out what URL will direct me to the admin page. Peter P.S. I'm doing some work on the ansible to get this all set up - I'll do a PR once everything seems to be working. On Fri, 19 Oct 2018 at 01:25, Alexandru Mahmoud <amahmou4(a)jhu.edu> wrote: > Hello! > > I am new to the team, so this will be a brief response to only one of your > questions while waiting for someone else to get to the email (and I am not > replying all so that people don’t dismiss it as answered): > > For 3 specifically, you can access the admin panel at http://127.0.0.1(or > localhost):8000/admin, where you should be able to login with the user > created with the ‘createsuperuser’ command. Under “Appliances” or > “Applications” (depending on the version of cloudlaunch) you’ll be able to > see and change/add configurations for apps. > If you want to see in more detail how the appliances are being set up and > how the launch config is used in code, look for the "Backend component > name", then find the corresponding backend plugin in the cloudlaunch repo. > I hope that is a helpful start, and feel free to email me if nobody > responds in a reasonable amount of time to your other questions, as I can > get more answers in person and relay them to you. > > Best, > Alex Mahmoud > > > On Oct 18, 2018, at 3:45 PM, Peter van Heusden <pvh(a)sanbi.ac.za> wrote: > > Hi there > > I'd like to set up cloudlaunch to be able to set up on-demand Galaxy > servers and associated clusters on the new Ilifu OpenStack cloud. From > looking around the repositories it looks like Cloudlaunch is at least 2 > components: > > 1. The cloudlaunch server > 2. The UI - either cloudlaunch-ui or cloudlaunch-cli > > I'm trying to get cloudlaunch server installed on a Ubuntu 18.04 VM. The > only requirement seems to be python3-pip. For postgresql support I > installed the python3-psycopg2 module, the postgresql-10 server and create > a user and db (both named cloud). Then I installed the server with `pip3 > install cloudlaunch-server` and ran commands: > > cloudlaunch-server django migrate > cloudlaunch-server django createsuperuser > cloudlaunch-server django runserver > > The next step (https://github.com/galaxyproject/cloudlaunch) refers to > redis-server. Installing this package seemed to satisfy that requirement, > running it manually didn't work so I just ran the celery command as > illustrated. And finally relaunched the django server. > > Then nodejs and npm were installed, the cloudlaunch-ui cloned from github, > the various npm package specified installed and finally npm start brings up > the cloudlaunch user interface. > > So far so good but: > > 1. Is there more extensive documentation anywhere? Specifically > documentation about running this in production. > > 2. Is there a docker container that can be used instead of all this manual > installation? > > 3. How are appliances configured and added to the Appliance Catalogue? > > Thanks! > Peter > ___________________________________________________________ > Please keep all replies on the list by using "reply all" > in your mail client. To manage your subscriptions to this > and other Galaxy lists, please use the interface at: > https://lists.galaxyproject.org/ > > To search Galaxy mailing lists use the unified search at: > http://galaxyproject.org/search/ > > >

1 0